
DocGo
Apr 11, 02:56 PM
Power Support for me as well. I like the clear one although it attracts fingerprints like crazy. But I also have the matte version that I alternate with the clear version.

bcaslis
Apr 17, 06:07 PM
This can be fixed by loosening the bottom screws (requires a special tool) and retightening in the right order. If everything else on it seems good then I would ask them to do this. If there are other problems than an exchange might be better.

JollyJoeJoe
Apr 23, 10:59 PM
So Im a freelance Editor/Motion Graphics guy with no real understanding of RAID Controller Cards, or how they work.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
3 drives in RAID0 ? Yikes, anyone of them goes and your machine is out of action. RAID0 offers no fault tolerance as no drives in the array share parity info or are mirrored.
You would most certainly see a benefit in a hardware RAID solution, especially if you are going to switch to a RAID level with some redundancy, like RAID5 or RAID10. Also a true hardware RAID takes the processing load off your processors and memory.
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
or Just RAID5 with 3x HDD's and partition the RAID volume.
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
I would go with a 6G controller so as to take advantage of new fast 6G SSD's etc.
nanofrog is the RAID-whizz around here and I am sure he would be able to suggest something for you.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
3 drives in RAID0 ? Yikes, anyone of them goes and your machine is out of action. RAID0 offers no fault tolerance as no drives in the array share parity info or are mirrored.
You would most certainly see a benefit in a hardware RAID solution, especially if you are going to switch to a RAID level with some redundancy, like RAID5 or RAID10. Also a true hardware RAID takes the processing load off your processors and memory.
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
or Just RAID5 with 3x HDD's and partition the RAID volume.
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
I would go with a 6G controller so as to take advantage of new fast 6G SSD's etc.
nanofrog is the RAID-whizz around here and I am sure he would be able to suggest something for you.

nickdag
May 3, 12:30 AM
Any opinions for my new SSD?
Mid-2010 MBP13
Crucial M4 256gb
vs
Intel 320 Series 300gb
As far as I can see, I've gathered the following:
Intel:
Slightly better track record (MTBF)
More expensive
Frequently backordered
Slightly slower in most benchmarks than the Crucial
Offers a Mac ISO for firmware upgrades
Crucial:
I don't really know much about it...
Bit cheaper than the Intel
Bit faster
Smaller capacity
While I'm here, I'll ask another question. I intend on doing a clean install on my SSD (as opposed to cloning my current drive). Do I need the upgrade kit? Or, can I order an OEM version (they're less frequently backordered)? Will I be missing any screws or cases or useful/vital instructions?
thanks,
nick
Mid-2010 MBP13
Crucial M4 256gb
vs
Intel 320 Series 300gb
As far as I can see, I've gathered the following:
Intel:
Slightly better track record (MTBF)
More expensive
Frequently backordered
Slightly slower in most benchmarks than the Crucial
Offers a Mac ISO for firmware upgrades
Crucial:
I don't really know much about it...
Bit cheaper than the Intel
Bit faster
Smaller capacity
While I'm here, I'll ask another question. I intend on doing a clean install on my SSD (as opposed to cloning my current drive). Do I need the upgrade kit? Or, can I order an OEM version (they're less frequently backordered)? Will I be missing any screws or cases or useful/vital instructions?
thanks,
nick
more...

DocGo
Apr 11, 02:56 PM
Power Support for me as well. I like the clear one although it attracts fingerprints like crazy. But I also have the matte version that I alternate with the clear version.

lordonuthin
Oct 20, 10:28 PM
yeah i ran across that review when searching. it's only slightly faster though, and a little harder to overclock. but i bet it would be good at folding. i wonder if many people are using them?
I wonder if cuda would run on the 9400? graphics chip? that would help get some extra ppd. Too bad you can't change graphics boards in that monster iMac, it seems like it could use faster graphics for that large monitor.
I wonder if cuda would run on the 9400? graphics chip? that would help get some extra ppd. Too bad you can't change graphics boards in that monster iMac, it seems like it could use faster graphics for that large monitor.
more...

chown33
Apr 24, 02:03 PM
Did you try googling the obvious: palindrome python program
One of the top 10 hits is this:
http://forums.macrumors.com/showthread.php?t=861800
One of the top 10 hits is this:
http://forums.macrumors.com/showthread.php?t=861800
awmazz
Aug 26, 04:24 PM
I imagine the situation in Australia is that the independents and Greens will be wooed - until the very first opportunity to dump them occurs, at which point they'll be discarded posthaste.
Yep, they usually do that here too, but this time around sufficient number of voters didn't want either of them enough to hold their nose and vote for the other one. Usually if there's someone you can't vote for you can always find someone to vote against. This election also had the highest number of 'informal' nobody at all votes for three decades I think.
Haha, going on what I said previously about them granting the Independents' wishes, the political cartoons are reflecting this - one has an independent asking "can I have a pony?". Another one is asking for a rocketship to send one of his cows over the Moon and the big party leaders are nodding in agreement, yep, we can give you that... :)
Yep, they usually do that here too, but this time around sufficient number of voters didn't want either of them enough to hold their nose and vote for the other one. Usually if there's someone you can't vote for you can always find someone to vote against. This election also had the highest number of 'informal' nobody at all votes for three decades I think.
Haha, going on what I said previously about them granting the Independents' wishes, the political cartoons are reflecting this - one has an independent asking "can I have a pony?". Another one is asking for a rocketship to send one of his cows over the Moon and the big party leaders are nodding in agreement, yep, we can give you that... :)
more...

uknick
Mar 25, 04:51 AM
That's the best thing you could've done, because I failed to do so, and now I waiting for my iPad to be shipped on April 20th, here in the US.:mad:
Yes I'm hoping that it will be first come first served basis and maybe it will be early next week??
Yes I'm hoping that it will be first come first served basis and maybe it will be early next week??
Macky-Mac
Apr 20, 07:06 PM
....And since I'm not moving in for months, should I wait until what, a week before moving in to pay them the security and rent?
You're four months away from wanting to actually move in??? I think you're looking to early.
I can't imagine any landlord holding an apartment that long without your paying for all the time you wont be living there
You're four months away from wanting to actually move in??? I think you're looking to early.
I can't imagine any landlord holding an apartment that long without your paying for all the time you wont be living there
more...

Starfox
May 2, 03:50 PM
I didn't install Flash on my 2011 MBP, probably never will - I use YouTube5 Safari extension to watch their videos. Is there a way to download youtube videos with this setup? Would love to have them as H.264.

iGary
Sep 9, 06:31 AM
Gun's n' Roses singing "Mama Kin" off the "Lies" album.
"This is a song about your effing mother." :D
"This is a song about your effing mother." :D
more...

pmasters
Feb 4, 02:36 PM
Why not just use Migration Assistant? I used that to transition my wife from an old PowerBook G4 to a MacMini and it was really simple. There were a few quirks since the other was such an old computer using a PowerPC chip, but it made the whole process really simple. I'm now kicking myself for not doing that when I bought my MacPro back in 2009.
Noticed that when I booted up and then I saw your post. Excellent recommendations. I used the migration assistant and everything is transferring now.
Thanks again to you both. =D
Noticed that when I booted up and then I saw your post. Excellent recommendations. I used the migration assistant and everything is transferring now.
Thanks again to you both. =D

generik
Dec 22, 06:07 PM
The big idea is you will probably void your warranty doing the mods, and seeing as to how Macs need warranty these days, less obligations for Apple! :D
more...

collisos
May 1, 05:07 PM
There has not been any concrete information because nothing official has been released. The only piece of official evidence is WWDC invites. There are however plenty of rumours swirling around.
This thread has you covered, all thats needed was a simple search.
http://forums.macrumors.com/showthread.php?t=1092467&highlight=ios5
okay thanks appreciate it, typed in iOS 5 in the search but maybe I just missed it
This thread has you covered, all thats needed was a simple search.
http://forums.macrumors.com/showthread.php?t=1092467&highlight=ios5
okay thanks appreciate it, typed in iOS 5 in the search but maybe I just missed it

Cindori
May 1, 04:40 AM
I would recommend to hold off any GPU purchases until Lion is released.
more...

Blackhatch
Apr 5, 08:30 AM
What is your budget? What do you expect to do with the camera? What lighting conditions? Will you be recording audio using the camera or an external device? What mics do you have/plan to get? How will it be supported? What do you plan to edit with? What is your final output?
Budget - I would like to keep it under $800
Lighting conditions - should be very good as I will normally be shooting in daylight and clear weather.
Mics - I don't have any but will get whatever is required. I was going to add most of the audio after the fact for clarity's sake.
Edit - Not sure. Whatever is most friendly and easy to work with.
Output - This will be video content for my website.
Basically...I am a contractor that wants to post of some video of completed jobs with some audio about what we do and why.
Budget - I would like to keep it under $800
Lighting conditions - should be very good as I will normally be shooting in daylight and clear weather.
Mics - I don't have any but will get whatever is required. I was going to add most of the audio after the fact for clarity's sake.
Edit - Not sure. Whatever is most friendly and easy to work with.
Output - This will be video content for my website.
Basically...I am a contractor that wants to post of some video of completed jobs with some audio about what we do and why.

ATD
Oct 19, 04:50 PM
http://att.macrumors.com/contest/593B57.jpg
An ad that I rendered in Maya. I might animate later. :D :D
An ad that I rendered in Maya. I might animate later. :D :D

appleguy123
Apr 24, 03:10 PM
Thats awesome, thanks!
applemike68
May 5, 06:57 PM
feeling the same way, forgot to mention that I also have a Iphone 4 along with the Ipad 2 and MBP. I love this MBP plus the company bought it. I guess i could sell the Ipad 2 and buy the new imac for home..Not sure, I guess a good problem to have. Again, just curious what others thought.
DewGuy1999
May 6, 08:17 PM
What kind of ports are used for each graphic card and it's corresponding monitor, ie, DVI-to-DVI, etc.? Have you tried different video cables?
alust2013
Jan 29, 03:42 PM
If you've got the matter/silver ones, then you'll just need a miniDisplayPort to DVI adapter as well as an HDMI male to DVI female adapter
VideoBeagle
Apr 26, 07:27 PM
I'm wanting to try making some AMV's....those videos you see on Youtube taking a song and making a video out of clips from a cartoon...the better ones often get some nice lip syncing going.
What software would be good to look at for this kind of thing?
I have iLife 11...does iMovie give enough control for placement of clips? I have 6/HD stored somewhere I could rev up, since it had so much more features..has the new style iMovie started hitting parity?
What software would be good to look at for this kind of thing?
I have iLife 11...does iMovie give enough control for placement of clips? I have 6/HD stored somewhere I could rev up, since it had so much more features..has the new style iMovie started hitting parity?
AppleIntelRock
Jul 9, 01:28 AM
looks like i'm going to los gatos
No comments:
Post a Comment